C Miller Customs LLC

C Miller Customs LLC Ground up rat rod builds, custom one off plasma cut pieces for art or prototyping, production plasma cut pieces

Wrapped up like a boat but I promise it’s not a boat... stayed tuned for more pictures to come. #shopequipment #upgrad...
04/23/2019

Wrapped up like a boat but I promise it’s not a boat... stayed tuned for more pictures to come.

#shopequipment #upgrade #christmascameearly #roadtrip #upstateny #middleofnowhere

Super excited how this turned out! 32” flag with stand is up for raffle at Buffalo Wild Wings for the St. Baldrick's F...
04/17/2019

Super excited how this turned out! 32” flag with stand is up for raffle at Buffalo Wild Wings for the St. Baldrick's Foundation Alliance, Ohio Event. We will be selling tickets up till the end of the event then draw the lucky winner. Winner need not be present to win. Just make sure you write down your phone number on the ticket stubs. 100% of the proceeds will go directly to St. Baldrick’s foundation.

I took my standard tattered flag and hand blued the stars with a torch and a couple accent areas. Then painted the candy red areas. Then layed real smoke down on the flag to give it a truly dear resales look. Finally I finished it up with 3 coats of super gloss clear on the front and back to give it a shine that will last for years!

Don’t miss your chance on this one folks. The value of this flag is $275 and you could get it for as little as ONE DOLLAR!!!
Tickets are
1-$1
7-$5
15-$10

I think the ol #duramax makes this #d8t look little haha. More pictures to come from the work I did last week in NY and ...
04/08/2019

I think the ol #duramax makes this #d8t look little haha. More pictures to come from the work I did last week in NY and PA. Got to meet some cool guys this week and maybe I’ll get to work along side them again in the future. @ Waterloo, New York

We have officially grown by one here at C. Miller Customs. Here is ms Carlie Jeane Miller born at 1:02pm weighing in at ...
03/21/2019

We have officially grown by one here at C. Miller Customs. Here is ms Carlie Jeane Miller born at 1:02pm weighing in at 8.02lbs. So the shop will be closed for the next week. Thank you everyone for all the support and I promise there is more big news to come within the next month or so!

#thecrewisgrowing #familybusiness #babynumber2 #shelooksjustlikehersister

Here’s the follow up for my “cad” drawing post the other week. They were templates for the engine side covers on t...
03/14/2019

Here’s the follow up for my “cad” drawing post the other week. They were templates for the engine side covers on this 33 Ford. I also had to chop down a stock size billet grill to fit this one, install a complete wiring harness, fit the hood and grill, make a custom gas tank, modify the exhaust, and a few other odds and ends of things to finish it up so it’s ready for paint and interior.

#ford #hotrod #choppedandchanneled #oneoff #sheetmetalfab #makeitwork #hotrodshop #cmillercustoms @ C Miller Customs LLC

A little throw back to 5 years ago to end the day with. I learned a lot over the 4 years it took to build this.#ratrod #...
03/12/2019

A little throw back to 5 years ago to end the day with. I learned a lot over the 4 years it took to build this.
#ratrod #ratrodmagazine #ratrodtruck #deuceandahalf #theprojectthatstarteditall #metalfab #builtnotbought #oneofone #ratrodlife #ratrodaddiction #military #madeinamerica #merica

When off the shelf won’t fit exactly the way you’d like #flowmasterexhaust #tigwelding #racecarparts
03/11/2019

When off the shelf won’t fit exactly the way you’d like

#flowmasterexhaust #tigwelding #racecarparts

I have the Miller Welders  252 working hard in the shop and it’s laying down some great welds on this crappy old mater...
02/25/2019

I have the Miller Welders 252 working hard in the shop and it’s laying down some great welds on this crappy old material. Then I have Benchmark Abrasives badass flap disks feathering out the paint and cleaning to good steel all in one pass. You can have all the knowledge in the world but without the proper equipment every job is going to be a nightmare.

#millermatic252 #benchmarkabrasives #modificationstobetterhelpthecustomer #localbuisnesssupportinglocalbuisness #steelmig #internationaldumptruck #bigtruckbigjob #ateampaintjob @ C Miller Customs LLC

Sorry for not posting much lately. Current partial view of the shop. Busy busy.
02/12/2019

Sorry for not posting much lately. Current partial view of the shop. Busy busy.

Is your aluminum wheel loosing air constantly? Hit a nasty pothole? Think you@might have a cracked wheel? We can fix it!...
01/30/2019

Is your aluminum wheel loosing air constantly? Hit a nasty pothole? Think [email protected] have a cracked wheel? We can fix it! Take your car to vans tire (old discount tire) and if you have a cracked wheel they will send it to me and I’ll make it good as new!

#aluminumwheelrepair #supportlocalbuisness #localbuisnessessupporteachother #wecanfixit #tigwelding #aluminumtig #potholessuck @ Van's Tire & Brake of Alliance

I hope everyone everyone made it threw this snow storm without breaking anything but if you need any welding done  to ge...
01/21/2019

I hope everyone everyone made it threw this snow storm without breaking anything but if you need any welding done to get you back up and going and ready for the next snow storm let me know and we can get you fixed up and back out there!

Working on my “CAD” skills today. #cardboardassisteddesign #sheetmetalfab #oldschool #hotrodparts #ifyoucantbuyitmak...
01/16/2019

Working on my “CAD” skills today.

#cardboardassisteddesign #sheetmetalfab #oldschool #hotrodparts #ifyoucantbuyitmakeit

Super pumped with how this double sided sign turned out for Red Barn Home Furnishings . Go over to their page and give t...
01/07/2019

Super pumped with how this double sided sign turned out for Red Barn Home Furnishings . Go over to their page and give them a follow and check out some badass woodworking. And if you regularly drive up and down 183 between alliance and Minerva you’ll be able to see the sign age and acquire a natural patina

#smallbuisnessessupportsmallbuisnesses #buylocal #cncplasma #customsignage @ C Miller Customs LLC

Timeline Photos
12/24/2018

Timeline Photos

This mangled mess is the result of a improper recovery. Trailer sunk in 3’ of mud with 75,000 lbs loaded inside of it ...
12/23/2018

This mangled mess is the result of a improper recovery. Trailer sunk in 3’ of mud with 75,000 lbs loaded inside of it and instead of wrapping a strap around the whole trailer and lifting up they hooked to the back of the 5th wheel plate and tried pulling forward and up and the cables blew threw the bulkhead, mangled the catwalk, and tried destroying the 5th wheel plate.

This mangled mess is the result of a improper recovery. Trailer sunk in 3’ of mud with 75,000 lbs loaded inside of it ...
12/23/2018

This mangled mess is the result of a improper recovery. Trailer sunk in 3’ of mud with 75,000 lbs loaded inside of it and instead of wrapping a strap around the whole trailer and lifting up they hooked to the back of the 5th wheel plate and tried pulling forward and up and the cables blew threw the bulkhead, mangled the catwalk, and tried destroying the 5th wheel plate.

Little throw back to 4 years ago when I got my first big piece of equipment to eventually start my own business. It has ...
12/21/2018

Little throw back to 4 years ago when I got my first big piece of equipment to eventually start my own business. It has always been a dream of mine and I can’t believe I have officially been in business for 2 years already. Thank you to everyone who has supported me and encouraged me along the way.

#whywomanlivelongerthanmen #someonehastodoit #smallbuisnessowner #bendpak #behindthescenes #throwbackthursday
Osha Isthis Ok

@the_real_dick_nillon for the photo

Today’s situation... and no this tailgate wasn’t cut off. #oops  #madeitcount #nomatchforadozer #aluminumwelding #al...
12/20/2018

Today’s situation... and no this tailgate wasn’t cut off.
#oops #madeitcount #nomatchforadozer #aluminumwelding #aluminumtrailer #igotothecustomer #miracleworker #itsalwaysfixable #glueitbacktogether #igotthis

On the road again for another week to fix some carnage. Stay tuned for before and after pictures!
12/16/2018

On the road again for another week to fix some carnage. Stay tuned for before and after pictures!

I’m sure some of you wonder what all I do when I travel. Well here’s what I was tasked with in Long Island. Customer...
11/29/2018

I’m sure some of you wonder what all I do when I travel. Well here’s what I was tasked with in Long Island. Customer had worn threw the walls of the trailer because the material they hall is really abrasive so he got full length 3/16” wall liners. Then the sub deck system needed completely replaced due to being worn out. I went to the customer and did everything on site to eliminate the expensive transportation costs and to assess the rest of the fleet (which I will be going back to work on other trailers in the future). I roll up fully equipped to handle all their needs and only require a air source and power supply.
#igotothecustomer #savingthecustomermoney #bringiton #trailerlivesmatter #extendingtrailerlife #imyourguyforthejob #aluminumwelding #aluminumtrailer #getthattrailerbacktomakingmoney @ C Miller Customs LLC

This was a very interesting project. Customer bought this as a pre designed “weld together” kit. Well it was far fro...
11/27/2018

This was a very interesting project. Customer bought this as a pre designed “weld together” kit. Well it was far from that unfortunately and required a lot of custom fitting and completely making new parts. There were no blueprints or drawings. Just a few pictures and some horrible typed out instructions. But overall it turned out great and will fit his needs exactly.

Little sneak peek of what’s been going on in the shop. Final pictures to go up Monday unless this gets a lot of attent...
11/25/2018

Little sneak peek of what’s been going on in the shop. Final pictures to go up Monday unless this gets a lot of attention maybe I’ll post everything up tomorrow night

Black Friday sale!!! I have a bunch of cut outs just sitting around so why not offer all of you a great deal. This will ...
11/21/2018

Black Friday sale!!! I have a bunch of cut outs just sitting around so why not offer all of you a great deal. This will be Friday 10AM to 3PM. Unfortunately after this my prices will have to go up slightly due to the rising cost of material. I’ve tried to hold off as long as possible but the time has come. Look for the banner on the building and my trailer sitting outside if you’ve never been here. Address is
19 E Chestnut St
Alliance OH 44601

Also if you stop by you will be able to see the shop project before anyone else that I’ve posted teaser pics of. Hoping to start production on them by the first of the year!

Lots of aluminum welding going on today. Unfortunately not everything I do is glorious. Sometimes you have to do the big...
11/05/2018

Lots of aluminum welding going on today. Unfortunately not everything I do is glorious. Sometimes you have to do the big ordered to get the special custom pieces. It all works out in the end though.

#aluminumwelding #productionwelding #boring #burningwirefordays #makingthatmoney #someonehelpme #bigcompanysupportingalittleone

11/05/2018
BleepinJeep.com

Really cool walk around done on the Comanche.

Check out this bad to the bone Comanche built by Off the Grid Motorsports at the Bullet Liner (High Caliber Protection) booth! Its amazeballs!

Had a great time in Vegas but I’m back in Ohio and ready to get some stuff done at the shop this week. It’s going to...
11/04/2018

Had a great time in Vegas but I’m back in Ohio and ready to get some stuff done at the shop this week. It’s going to be a crazy week trying to catch back up and then next week I will be in Long Island New York working. So if you need anything please call before stopping by the shop Just in case I’m not there.

#sema #sema2018 #alwaysworking #workhardplayhard #travelforwork

Still hitting it hard looking for new ideas and new equipment to give you a product that is the best out there!#sema
11/01/2018

Still hitting it hard looking for new ideas and new equipment to give you a product that is the best out there!
#sema

Here it is everyone! Special thanks to @offthegridmotorsports @bulletlinerofcanton  for letting me be apart of this buil...
10/30/2018

Here it is everyone! Special thanks to @offthegridmotorsports @bulletlinerofcanton for letting me be apart of this build and letting me do the custom cage for the @ironjacketmj
#sema #rollcage #custombuilt #notinstores @ The SEMA Show

10/19/2018

Last full day of vacation so some #shananigans had to happen. #workhardplayhard #funinthesun #readytobebackintheshop #sunnyflorida #nogutsnoglory

Customer wanted a ladder rack he could 1000+pounds on and not worry about it. He also wanted removable bars so he could ...
10/13/2018

Customer wanted a ladder rack he could 1000+pounds on and not worry about it. He also wanted removable bars so he could ball his dirt bike on the weekends. Mission accomplished with 1.5” sq tube and 2 removable cross bars.

Not to rub it in or anything but this is my current situation... not to rub it in or anything haha. But I will be out of...
10/11/2018

Not to rub it in or anything but this is my current situation... not to rub it in or anything haha. But I will be out of the shop until the 22nd. I usually check my phone once or twice a day so if you need anything shoot me a message, email, text, or leave a voicemail and I will to back to you wen I’m able to.

Everyone is posting pictures of the sunrise. Here’s all I see when I go to look at the sunrise lol #worklife #workflow...
10/09/2018

Everyone is posting pictures of the sunrise. Here’s all I see when I go to look at the sunrise lol #worklife #workflow💰 #nosunrisetoday #intheshop #feellikeilivehere

Had a lot of fun working with the customer on this one. It is still a work in progress with some other accessories to co...
10/09/2018

Had a lot of fun working with the customer on this one. It is still a work in progress with some other accessories to come including a tailgate, body pans to tie the bed in more, and possibly a tire rack. But I think we hit the nail on the head with a nice big usable bed that doesn’t take away from the fun you can have in one of these. #rzr #rzr800 #workandplay #aluminumwelding @ C Miller Customs LLC

Shop truck just rolled over 200000 miles and is still putting work in every day! And I must say it still looks good doin...
10/07/2018

Shop truck just rolled over 200000 miles and is still putting work in every day! And I must say it still looks good doing it too even though it’s 10 years old. #duramax #shoptruck #doingwork #flatbedtruck #200000miles @ C Miller Customs LLC

Finally got to take the shop project out for its first tests today. Got some good video of it thanks to @the_real_dick_n...
09/29/2018

Finally got to take the shop project out for its first tests today. Got some good video of it thanks to @the_real_dick_nillon but also found a few issues that need addressed before it’s revealed and this was the only carnage so overall it was a good test run.

Custom aluminum flap weights for a buddy
09/29/2018

Custom aluminum flap weights for a buddy

Good friend of mine is selling his vw race car. I’ve personally looked the car over and seen it race so I will vouch f...
09/27/2018
1986 VW Jetta MKII, VR6 Swapped, Caged, Racecar, ChampCar -Lemons Legal | eBay

Good friend of mine is selling his vw race car. I’ve personally looked the car over and seen it race so I will vouch for it as being a great car. This would be a great start for someone looking to get into budget minded racing in a awesome series!
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F202449037798

The Jetta was professionally swapped in the early 2000s and used as a show car before a hail storm dented the body and it was retired to a scca rallycross car. The vr6 conversion was completed using a 93 SLC donor car and included the full harness and fuse box. | eBay!

Come out and see me. Set up on the north side of the ponds by the food trucks
09/22/2018

Come out and see me. Set up on the north side of the ponds by the food trucks

Here’s some of the latest custom cut plasma pieces I’ve done.
09/13/2018

Here’s some of the latest custom cut plasma pieces I’ve done.

Another sneak peek of the shop project slowly making progress. Hopefully it’s ready to start testing the end of next w...
09/11/2018

Another sneak peek of the shop project slowly making progress. Hopefully it’s ready to start testing the end of next week

When I say I work on a little bit of everything that is a true statement. From old hot rods to airplanes to forklifts to...
09/06/2018

When I say I work on a little bit of everything that is a true statement. From old hot rods to airplanes to forklifts to rzrs. And that’s just what’s in the shop right now!

Quick little repair I had to do on a mower deck. Customer dropped it off on his way to work and picked it up on his way ...
08/16/2018

Quick little repair I had to do on a mower deck. Customer dropped it off on his way to work and picked it up on his way home and was only charged $30. A lot better then finding a new deck and the bracket now has twice as much weld as it did from the factory so it should be good for another 10 years at least.

Stacks of trophies. 153 to be exact. 150 with the cutout city skyline and 3 with aluminum skyline. All for the nation co...
08/15/2018

Stacks of trophies. 153 to be exact. 150 with the cutout city skyline and 3 with aluminum skyline. All for the nation corvair clubs annual show that they had this year in Pittsburg. Biggest order I’ve done to date and I am really pleased with the finished “aged” look.

Here’s a fully tig welded transfer tank I custom made to fit the front of a customers trailer so he can always make su...
08/08/2018

Here’s a fully tig welded transfer tank I custom made to fit the front of a customers trailer so he can always make sure his skid steer always has fuel even on big jobs. Then he went ahead and had me build mounts and instal it on his trailer along with a integrated hose holder for the transfer pump.

Address

21 E Chestnut St
Alliance, OH
44601

Telephone

(330) 206-4296

Alerts

Be the first to know and let us send you an email when C Miller Customs LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to C Miller Customs LLC:

Videos

Nearby advertising & marketing companies


Other Alliance advertising & marketing companies

Show All